The PNRRKIT is a Re-radiating system which allows you to re-radiate the GPS L1 carrier indoors. The PNRRKIT consists of a plug-in Re-Radiating amplifier & a Re-Radiating Antenna. It differs from the HNRRKIT in that it does not provide a roof antenna. The standard configuration does not provide source voltage to an active antenna but it may be specified.  For Example: PNRRKIT-N/110 is the standard configuration but it may also be ordered as an PNRRKIT-N/110/5 which would send 5vdc to power an active antenna.  The signal from the roof antenna is amplified and radiated out the Re-radiating antenna. If the GPS Receiver has line of sight with the Re-radiating antenna, it will receive the signal up to 30+ meter away.

 

The L1/L2 PNRRKIT is a portable network re-radiating kit that comes standard with a plug-in Re-radiating amplifier and a re-radiating antenna. It does not include an active L1/L2 roof antenna. The standard configuration does not provide source voltage to an active antenna but it may be specified. For Example: L1/L2PNRRKIT-N/220 is the standard configuration but it may also be ordered as an L1/L2PNRRKIT-N/220/5 which would send 5vdc to power an active antenna. The signal from the roof antenna is amplified and radiated out the Re-radiating antenna. If the GPS Receiver has line of sight with the Re-radiating antenna, it will receive the signal up to 30 meter away.
 

The HNRRKIT is a complete re-radiating system to allow you to re-radiate the GPS L1 carrier signal indoors. The HNRRKIT consists of a Roof Antenna, a plug-in re-radiating amplifier & a re-radiating antenna. The roof antenna is a 38db Gain, 50 ohm antenna. The re-radiating amplifier has a 110V/220V/240V Plug-in transformer which powers the amplifier and the roof antenna. The signal from the roof antenna is amplified and radiated out the re-radiating antenna. If the GPS receiver has line of sight with the re-radiating antenna, it will receive the signal up to 100 feet away. The antenna voltage is standard set at 5VDC otherwise the customer must designate the source voltage and power supply preferred. For Example: HNRRKIT-N/5/110 is a Hangar Network Re-Rad Kit with a 110V power supply sending 5vdc to the antenna.

The L1/L2 HNRRKIT is a complete Re-radiating system to allow you to re-radiate the GPS L1/L2 carrier indoors. The L1/L2HNRRKIT consists of a Roof Antenna, a plug-in Re-Radiating amplifier & a Re-Radiating Antenna. The roof antenna is a L1/L2 35dB Gain, 50 ohm antenna. The Re-radiating amplifier has a 110V/220V Plug-in transformer which powers the amplifier and the roof antenna. The signal from the roof antenna is amplified and radiated out the Re-radiating antenna. If the receiving antenna has line of sight with the Re-radiating antenna, it will receive the signal up to 30 metert away. The antenna voltage is set at 5VDC. The customer must designate the source voltage(110/220/6-30VDC). For Example: L1/L2HNRRKIT-N/220 is a Hanger Network RRKIT with a 220V source.